Professional Carpet Cleaner
Self contained walk behind large area carpet with built in rotating brush and squeegee.
Shampoos, brushes and dries 50cm path with 60db sound.

Features:

Tanks separate for transport
Quiet 60db Operation
Adjustable brush pressure
Adjustable water flow

Extras: (NOT INCLUDED IN PRICE)

Wand and upholstery tool
Hard floor brush and sqeegee
WATER HEATER

Tanks	50L Solution & Recovery
Tank Construction	High Density Polyethylene
Water Lift	2750 mm H2O
Vacuum Motor	1300W 3 Stage
Air Flow	2700 L/m
Pump with By-Pass	80W 9Bar 4.5L/m
Power Cable Length	15m
Hose Length	3.5
Weight	55kg
Dimensions	500 x 860 x 970

Warranty: 1 Year

OPTIONAL ACCESSORIES (EXTRA COST APPLIES, PLEASE CONTACT US ON (03)95714511 FOR DETAILS):

The squeegee is an optional accessory which can be applied to the carpet extractor Elite-Silent, allowing it to clean also hard floor. It is very easy to connect the squeegee to the machine, thanks to a special push-coupling. It is possible to tune by hand the angle of the squeegee with respect to the hard floor surface, without using any wrench. No tools required to fit sqeegee. Quick change brush.

	The instant hot water unit HT1800 has fresh water as input and hot water as output for a deep cleaning of very dirty carpet or textiles. It is possible to attach it to the lower tank of Santoemma extractors (Sabrina-Maxi, Serena-Silent, Grace, Elite-Silent and Powerful), but it can be used also with extractors of any other brand. The boiler has a double protection to avoid overheating. It is also protected against dry working. The status of the 2 thermal protection is shown by 2 lights. It is possible to achieve higher temperatures by letting the water re-circulating into the solution tank for some minutes.

Advantages of HT1800

The instant heating system allows to clean with hot water immediately after the machine is switched on.
Its modular design allows an easy connection to the machines.

Technical Data:
Voltage:	230V–120V–100V
Power:	1800W (1500W a 100V)
Cable lenght:	40 cm for 220V, 15 m for 120V and 100V
Dimensions:	11x16x34cm.
Weight:	6,5 Kg.

Temperature increase (Delta T) with respect to the input temperature Water temperature increases when using nozzles with smaller sections
Water-flow	Delta T Continuous flow	Working with brief intervals without spraying (max. 20-25 sec.)
Water-flow	Delta T Continuous flow	75% on 25% off	50% on 50% off
0,71 l/min (1 nozzle x 0.1) NS10PN	~ +35 °C	~ +46 °C	MAX
1,18 l/min (1 nozzle x 0.2)	~ +21 °C	~ +28 °C	~ +42 °C
1,5 l/min (3 nozzles x 0.1) NS300	~ +16 °C	~ +21 °C	~ +32 °C
1,87 l/min (1 nozzle x 0.3)	~ +13 °C	~ +17 °C	~ +26 °C
2,19 l/min (5 nozzles x 0.1) ELITE, POWERFUL	~ +11 °C	~ +14 °C	~ +22 °C
3,33 l/min (3 nozzles x 0.2)	~ +7,5 °C	~ +10 °C	~ +15 °C
With re-circulation of water it is possible to pre-heat the water in the solution tank. In about 10 minutes it is possible to pre-heat 25 litres of water for 10°C . The thermal protections, however, prevent the heating of water over 70° C.

Instant hot water unit, 1800W, complete with metal brackets to fix the heater on the machines and with a 3,5 meter solution pipe for preheating with recirculation.

Machines that can be used with the instant hot water unit:

SABRINA-MAXI , GRACE , ELITE-SILENT

Vacuum Cleaners PLUS

KERRICK ELITE SILENT, A PROFESSIONAL WALK BEHIND CARPET CLEANER EXTRACTOR FOR COMMERCIAL CARPET CLEANING